Commercial OEMs

HF Radio Power Supply

Input: 90-264 Vac 50 Hz

DC Output: +13.8 Vdc 30 A

The 3320 power supply is designed to be used with the Codan Sentry Radio and is fitted inside an aluminium housing with IP67 rating.

  • Designed to meet MIL-STD 810G for harsh environmental conditions
  • Protected against common electrical abnormalities such as over-voltage, under-voltage, over-temperature and reverse polarity
  • Suitable to operate in the harshest conditions
  • Designed to provide power to the Codan Sentry radio and float charge a standard Lead-Acid or GEL type battery.

Eclipse Solar PV Inverter

MIL-Systems developed and made the Eclipse next generation solar PV Inverter with reactive power control.

The Eclipse Inverter was designed and certified to the Australian AS4777 and European electrical safety standards.

In 2016, MIL-Systems was awarded the New Energy Technology Award in the Manufacturers Hall of Fame for its work on the Eclipse Inverter.

300W  Solar kit for battery charging

DC Output: +13.4 Vdc 10 A

The 0536 solar battery charging kit is a simple, modular kit containing everything required to charge a 12 Vdc battery bank in remote locations. All cables, tools and instructions are provided along with mounting framework for three 100w solar panels.

  • Designed to be assembled and installed by untrained personnel with little or no electrical knowledge
  • Solar charge controller supplied with pre-terminated cables to ensure batteries are correctly charged
  • Suitable to operate in harsh conditions
  • Designed to provide power to the Codan Sentry radio and float charge a standard Lead-Acid or GEL type battery.

Model 2501 Power supply unit

125 W AC/DC Power Supply

Input: 220 – 240 Vac, 50 Hz
Output: 24 Vdc 3.5 A, (18 A pk), 12 Vdc 3 A, 5 Vdc 1 A

Open frame power supply with high current output for large thermal printer.

  • Power Factor Corrected Input
  • Isolation 3000 Vrms input-output, 1500 Vrms input-chassis
  • 230 x 93 x 45 mm
  • Operational temperature 0ºC to +50ºC, with a fan that switches on above 50ºC
  • Complies with electrical safety standard AS60950
  • Complies with EMC standards AS/NZS3548 Class B, EN 61000-6-3, EN 55024
  • Over voltage, over current and over temperature shut down

Broadcast camera power supply system

Model 5030 and 5040

 

Input: 90 to 264 VAC, Single phase, 47 to 63 Hz
Output: 200V DC, 200W isolated, monitored supply

Operating Temperature: 0°C to 40°C

Isolated and monitored power supply system design providing reliable and safe power to broadcast grade video cameras located up to 2km from the power source.

  • Controlled start-up and safety sensing logic protecting against cable and connector faults.
  • Universal input allowing use in all countries.